Spend $300.00 to get free shipping

FluorEx Max Slimline 10" - Filter

FluorEx Max Slimline 10" - Filter

Experience unparalleled water purification with the FluorEx Max Slimline 10" Filter. Engineered for exceptional fluoride removal, this filter ensures non-detectable levels of fluoride from the...

Experience unparalleled water purification with the FluorEx Max Slimline 10" Filter. Engineered for exceptional fluoride removal, this filter ensures non-detectable levels of fluoride from the start. 

What makes the FluorEX Max truly remarkable is its all-natural, alumina-free composition. Unlike many other cartridges on the market, it leaves healthy minerals like calcium and magnesium in the water, (not like Reverse Osmosis Systems) creating a more balanced and enjoyable drinking experience. And the best part? It doesn't waste any water, unlike reverse osmosis systems.

Regular price
Tax included.

Share:

Facebook Tweet Pinterest
Product Specifications

Model: FluorEx Max Slimline 10"

Capacity: 2,000 liters or approximately 6-12 months, depending on usage. This means approx 12 months for 1-2 person household, or 6 months for 4 person household (*depending on volume of water used).

Efficiency: Starts at 99% removal rate, maintaining 90-95% effectiveness throughout its lifespan

Composition: All-natural, alumina-free media that prevents unwanted minerals leaching

Contaminant Removal: Effectively eliminates fluoride, heavy metals, and arsenic

Additional Recommendation: We highly recommend our Active Pure filter is installed upstream of the FluorEx filter to to remove heavy metals, so it protects the capacity of the FluorEX Max filter to focus on fluoride predominantly.

Flow Rate: The flow rate can be set up by the installer or by yourself: If your water flow is greater than 2 litres/min (if it takes you approx 5 seconds or less to fill your cup with filtered water) your water flow is travelling too quickly.

Monitoring of usage: We recommend to install a water flow meter to monitor usage.

Dimensions

Filter: 69mm diameter by 250mm length

Housing: 120mm Diameter by 305mm Length

Installation

If this is the first time installing this you will require a Slimline housing 10" - Please add this to your cart if you don't already have one 

Certification

In independent tests conducted by Ionza, the FluorEX Max was proven to remove fluoride with exceptional efficiency. Samples taken from Auckland City showed fluoride content of less than 0.05g/m3, making it virtually undetectable. We have tested many cartridges. Most of them had in common that they claim to remove 'up to 99% fluoride' and as Hill Laboratories, Hamilton NZ proved with samples taken by us, they did not! Most of them just took out 40-50% of fluoride, one achieved 78% but the water tasted bitter. Most of those contain alumina as media which is fraud with issues about aluminium leaching into the water. Additionally, this remarkable filter also removes heavy metals and arsenic, ensuring that your water is clean and safe. 

With a removal rate of 99% at the beginning of cartridge usage and approximately 90-95% after 2000 liters (*depending on water source and prefilter setup), the FluorEX Max delivers consistent and reliable performance. 

alka-spring-fda-approval.png

Test result Fluoride sample 1 = FluorEX-Max filter:.

hills-lab-test-fluorex-max-web-single-res.jpg

Product Manual

FluorEx Manual

FAQ

Find the most frequently asked questions below.

To replace the filters under your sink, please follow these steps:

1) Shut off the water supply: Locate the shut-off valve for your water filter system and turn it off to stop the water flow.
2) Release pressure: Open a faucet connected to the system to relieve any pressure inside the filter housing.
3) Remove filter housing: Depending on the type of filter system you have, twist or unscrew the filter housing to remove it from the filter head. Use a filter wrench if needed.
4) Remove old filters: Take out the old filters from the housing and dispose of them properly.
5) Prepare new filters: Remove any protective packaging from the new filters.
6) Install new filters: Insert the new filters into the filter housing, following the recommended order or orientation provided depending on your installed system.
7) Reassemble the housing: Place the filter housing back onto the filter head and secure it by twisting or screwing it tightly. Ensure it is properly aligned and sealed.
8) Turn on the water supply: Turn the water supply back on and check for any leaks. Run water through the system for a few minutes. If you encounter any difficulties or have concerns, it is recommended to consult a professional or reach out to customer support for assistance.

Yes, it can remove both forms of Arsenic (III & V). Chemically speaking, Fluoride is even more difficult to remove than Arsenic and our system removed virtually all of it in independent testing.